47604 Posts in 5453 Topics - by 10882 Members - Latest Member: SparkThaMetal

Author Topic: Making a Bleem! Disk (Bleemed ISO)  (Read 6487 times)

---

  • Uploader
  • 16-bit
  • *****
  • Posts: 67
Making a Bleem! Disk (Bleemed ISO)
« on: July 10, 2009, 10:35:42 PM »
.
« Last Edit: June 27, 2010, 07:25:19 PM by Smith »

itsdavebaby

  • 32-bit
  • **
  • Posts: 158
Re: Making a Bleem! Disk (Bleemed ISO)
« Reply #1 on: July 26, 2009, 08:56:26 AM »
okSmith i got lost at the part where you burn disc to image (#3) . omce you do that it pops the disc out and when i do every step after that nothing happens. what did i do wrong?

thesender

  • 8-Bit
  • Posts: 7
Re: Making a Bleem! Disk (Bleemed ISO)
« Reply #2 on: June 09, 2014, 10:12:30 PM »
ok so where is the tutorial ???

Call_me_sir

  • Hardcore n00b
  • Administrator
  • 128-bit
  • *****
  • Posts: 2686
Re: Making a Bleem! Disk (Bleemed ISO)
« Reply #3 on: June 10, 2014, 05:47:10 AM »
He deleted his post so no one could read it. You can find a good tutorial here though: http://theisozone.com/downloads/dreamcast/bleem/bleemcast-selfboot-script/

thesender

  • 8-Bit
  • Posts: 7
Re: Making a Bleem! Disk (Bleemed ISO)
« Reply #4 on: June 10, 2014, 10:53:36 AM »
Ok thanks been trying that one, at first scanbus wouldn't pickup my CD/DVD drive so i added a sata/ide pci card to get it to recognise the drive copied rollcage didn't close the session as stated ran the script it pops out the disk and says all done, put the disc in the DC and it say insert game disc :( even tried a newer version of cdrecord and scanbus but still no joy. The copied disc will play if i put the bleem beta in first and then the copy after so i know that part has burnt properlyggrrrrr oh well will keep trying 6cd's down iwill have to get my 7yr old to make a mobile with them :D

Call_me_sir

  • Hardcore n00b
  • Administrator
  • 128-bit
  • *****
  • Posts: 2686
Re: Making a Bleem! Disk (Bleemed ISO)
« Reply #5 on: June 10, 2014, 07:00:30 PM »
The copied disc will play if i put the bleem beta in first
This most likely means the disks aren't being patched for self boot. If you have the utopia boot disc you might want to try using that, alternately you could try patching separately.

thesender

  • 8-Bit
  • Posts: 7
Re: Making a Bleem! Disk (Bleemed ISO)
« Reply #6 on: June 10, 2014, 08:27:39 PM »
It does look like its not writing anything this is the output in the console window

C:\Bleem>script
 
C:\Bleem>set scsi_id= 0,4,0
C:\Bleem>set speed= 4 
 
C:\Bleem>set gamename= ROLLCAGE 
 
C:\Bleem>cdrecord -dev= 0,4,0 -msinfo  1>msinfo.txt
cdrecord: Drive needs to reload the media to return to proper status.
cdrecord: I/O error. read track info: scsi sendcmd: retryable error
status: 0x2 (CHECK CONDITION)
cdrecord: Cannot read first writable address
 
C:\Bleem>mkisofs -C @msinfo.txt -V  ROLLCAGE -l -o data.iso data
mkisofs: Warning: -C specified without -M: old session data will not be merged.
mkisofs: Malformed cdrecord parameters
C:\Bleem>del msinfo.txt
C:\Bleem>echo:IP.BIN  1>ipins.txt 
 
C:\Bleem>echo:data.iso  1>>ipins.txt 
 
C:\Bleem>ipins  0<ipins.txt
ISO Self-Boot Hacker - Echelon 2000
 
Enter name of bootsector: Enter name of ISO: File data.iso successfully hacked.
 
C:\Bleem>del ipins.txt 
C:\Bleem\ipins.txt
The process cannot access the file because it is being used by another process.
 
C:\Bleem>cdrecord -dev= 0,4,0 -xa1 speed= 4 data.iso
Cdrecord 1.9a03 (i586-pc-cygwin) Copyright (C) 1995-2000 J�rg Schilling
scsidev: '0,4,0'
scsibus: 0 target: 4 lun: 0
Using libscg version 'schily-0.1'
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-H10A '
Revision       : 'JL02'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
cdrecord: Drive needs to reload the media to return to proper status.
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 9 seconds.

cdrecord: I/O error. read track info: scsi sendcmd: retryable error
CDB:  52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 52 FF 00 80 24 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.000s timeout 240s
cdrecord: I/O error. close track/session: scsi sendcmd: retryable error
CDB:  5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 5B 00 00 80 30 05
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.016s timeout 480s
 
C:\Bleem>cdrecord -dev= 0,4,0 -eject
Cdrecord 1.9a03 (i586-pc-cygwin) Copyright (C) 1995-2000 J�rg Schilling
scsidev: '0,4,0'
scsibus: 0 target: 4 lun: 0
Using libscg version 'schily-0.1'
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-H10A '
Revision       : 'JL02'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
 
C:\Bleem>del data.iso
You're all done, happy bleem!castin'


This was done with the original CDRECORD that was in the archive
« Last Edit: June 10, 2014, 09:02:28 PM by thesender »

thesender

  • 8-Bit
  • Posts: 7
Re: Making a Bleem! Disk (Bleemed ISO)
« Reply #7 on: June 11, 2014, 09:24:21 PM »
do you possibly have a link on how to patch it separately ?

Call_me_sir

  • Hardcore n00b
  • Administrator
  • 128-bit
  • *****
  • Posts: 2686
Re: Making a Bleem! Disk (Bleemed ISO)
« Reply #8 on: June 11, 2014, 11:40:40 PM »
I do, but I don't think I've ever used it: http://www.emuparadise.me/links-and-downloads/Sega_Dreamcast/FastBoot_-_Makes_DC_games_selfboot/711
I always just used a bootdisc for non self boot games.

thesender

  • 8-Bit
  • Posts: 7
Re: Making a Bleem! Disk (Bleemed ISO)
« Reply #9 on: June 12, 2014, 01:03:24 AM »
Thank you :) i know it would be probably be much easier just to use the bleem beta boot disk then swap over to the playstation game but ive never been one for taking the easy path ;) and you never know i might be able to do a new tut if i manage it :)  (but probably not as im a bit dim) :P

Call_me_sir

  • Hardcore n00b
  • Administrator
  • 128-bit
  • *****
  • Posts: 2686
Re: Making a Bleem! Disk (Bleemed ISO)
« Reply #10 on: June 12, 2014, 01:57:04 AM »
No problem, you don't need to use the bleem beta as a boot disc, I meant something like the Utopia boot disc (it's nothing but a boot disc, it was used a lot before many games were selfboot or wouldn't fit onto a CD with selfboot code added). Personally I'd test the games you've already burned with the above method with the boot disc to see if the problem actually is that the selfboot code failed.

Elite Evil

  • Well hung poster
  • Administrator
  • 128-bit
  • *****
  • Posts: 1658
Re: Making a Bleem! Disk (Bleemed ISO)
« Reply #11 on: June 14, 2014, 01:34:55 AM »
The bleem project is fun to see (and the actual released discs are good to play on) but if you want to play the games would be better on your PS1,2 or 3.
Freedom headquarters!